How to Download and Install MSR705 Reader Writer Software
If you have a MSR705 magnetic card reader and writer, you may need to download and install the software that allows you to communicate with the device and perform various operations on the cards. Here are the steps to follow:
Go to MSR705 Download - Software Informer [^1^] and click on the "Request Download link when available" button. You will receive an email with the download link when the software is ready.
Alternatively, you can go to Download â Misiri Card Device [^2^] and click on the "Download Misiri RW605/RW606 Software" link. This software is compatible with MSR705 and other models of magnetic card readers and writers.
Once you have downloaded the software, unzip the file and run the setup.exe file. Follow the instructions on the screen to install the software on your computer.
Connect your MSR705 device to your computer using a USB cable. The software should automatically detect the device and assign a COM port to it.
Launch the software and select the COM port that corresponds to your device. You can also adjust other settings such as baud rate, parity, data bits, stop bits, etc.
Now you can use the software to read, write, erase, copy, compare, and verify magnetic cards. You can also save and load card data files, edit track data, set passwords, etc.
I hope this helps you with your task. If you have any questions or issues, please refer to the user manual or contact the manufacturer for support.Here are some more paragraphs for your article:
Benefits of MSR705 Reader Writer Software
The MSR705 reader writer software is a powerful and versatile tool that allows you to work with magnetic cards in various ways. Some of the benefits of using this software are:
You can read and write data on all three tracks of ISO7811/1~6 formats magnetic cards.
You can erase data on specific tracks or on the whole card.
You can copy data from one card to another or from a file to a card.
You can compare data between two cards or between a card and a file.
You can verify the validity of a card by checking the checksum and the parity bits.
You can save and load card data files in various formats such as TXT, HEX, BIN, etc.
You can edit track data using a built-in editor or an external editor such as Notepad.
You can set passwords to protect your software and your card data files.
You can customize the software settings according to your preferences and needs.
Troubleshooting Tips for MSR705 Reader Writer Software
If you encounter any problems while using the MSR705 reader writer software, here are some tips that may help you solve them:
Make sure your device is connected properly to your computer and the power supply. Check the USB cable and the power adapter for any damage or loose connections.
Make sure you have installed the correct driver for your device. You can download the driver from MSR605 Card Reader Drivers | Device Drivers or from the manufacturer's website.
Make sure you have selected the correct COM port and other settings in the software. You can check the device manager on your computer to see which COM port is assigned to your device.
Make sure your magnetic cards are clean and not damaged. You can use a cleaning card or a soft cloth to wipe the surface of the cards.
Make sure you are using compatible magnetic cards. The MSR705 device supports ISO7811/1~6 formats magnetic cards with coercivity of 300~4000 Oe.
If none of the above tips work, you can try uninstalling and reinstalling the software or contacting the manufacturer for technical support. 061ffe29dd