Firmware Reset Samsung Ml 2165w | Tested __FULL__
Download ->->->-> https://byltly.com/2tyD6a
How to Reset the Firmware of Your Samsung ML-2165W Laser Printer | Tested
If you have a Samsung ML-2165W laser printer, you may encounter some issues that require you to reset the firmware of your device. For example, you may see an error message that says "End of Life Replace New Cart" or "Not Compatible Toner Cartridge" even though you have installed a new or compatible toner cartridge. This is because the printer has a chip that counts the number of pages printed and prevents you from using the cartridge beyond its estimated life span. To fix this problem, you need to reset the firmware of your printer using a software tool that can override the chip's counter.
In this article, we will show you how to reset the firmware of your Samsung ML-2165W laser printer using a software tool called Fix Firmware Reset Cip ML-2160 ML-2164 ML-2165 ML-2165W ML-2167 ML-2168 W Resoftare Samsung MLT-D101. This tool has been tested by many users and has proven to be effective and safe. However, please note that resetting the firmware of your printer may void your warranty and may cause some damage to your device if not done properly. Therefore, we advise you to follow the instructions carefully and at your own risk.
Steps to Reset the Firmware of Your Samsung ML-2165W Laser Printer
Download the Fix Firmware Reset Cip ML-2160 ML-2164 ML-2165 ML-2165W ML-2167 ML-2168 W Resoftare Samsung MLT-D101 software tool from this link. This is a YouTube video that contains the download link in the description. You will need to extract the zip file after downloading it.
Connect your printer to your computer using a USB cable. Make sure that your printer is turned on and that there are no pending print jobs.
Open the extracted folder and run the file named "usbprns2.exe". This will open a command prompt window that will show you the current firmware version of your printer.
Press any key to continue. The software tool will then start to update the firmware of your printer. Do not turn off your printer or disconnect the USB cable during this process.
Wait until the software tool shows you a message that says "Firmware Update Success". This means that your printer's firmware has been successfully reset.
Turn off your printer and disconnect the USB cable. Wait for a few seconds and then turn on your printer again.
Your printer should now be able to print normally without any error messages. You can also check the firmware version of your printer by printing a test page.
Resetting the firmware of your Samsung ML-2165W laser printer can help you solve some common problems that may prevent you from using your device efficiently. However, this process is not without risks and may affect your warranty and device performance. Therefore, we recommend you to use this method only as a last resort and at your own responsibility. We hope that this article has helped you with resetting the firmware of your Samsung ML-2165W laser printer. If you have any questions or feedback, please feel free to leave a comment below. 061ffe29dd