Driver Usb Mtk 6253 Com Data If
Driver Usb Mtk 6253 Com Data If >>>>> https://tinurll.com/2tzmSB
How to Install Driver USB MTK 6253 COM Data IF on Windows
Driver USB MTK 6253 COM Data IF is a driver for Chinese mobile phones based on MediaTek chips (MTK 6218, 6225-6235, 6238, 6253)[^1^]. This driver allows you to connect your device with your PC for better data transfer or stable connection. However, installing this driver on Windows may require some extra steps. In this article, we will show you how to download and install Driver USB MTK 6253 COM Data IF on Windows.
Step 1: Download the Driver Zip File
The first step is to download the driver zip file from the link below. This file contains all versions of MediaTek USB/COM/Modem drivers[^1^]. You need to extract the zip file on your computer and open the folder.
Download MediaTek USB/COM/Modem Driver v.1.1121.0
Step 2: Disable Driver Signature Enforcement
The second step is to disable driver signature enforcement on your Windows system. This is because Windows enforces driver signatures by default and may not allow you to install non-digitally signed drivers. To disable driver signature enforcement, you need to follow these steps:
Click Settings and select Update & Security.
On the left panel, select the Recovery tab. Under Advanced startup, click Restart now.
After booting into advanced startup, select Troubleshoot > Advanced Options > Start-up Settings > Restart.
When you see Startup Settings, press number 7 or F7 on your keyboard to disable Driver Signature Enforcement. This will take about 3 minutes to boot.
Note: If youâre on Windows 7/ Vista, restart your computer, then press and tap the F8 key until you see Advanced Boot Options. Use the arrow keys to select Disable Driver Signature Enforcement.
Step 3: Install the Driver Manually
The third step is to install the driver manually on your computer. To do this, you need to follow these steps:
Type device manager in the search box and select Device Manager.
In Device Manager, select your PC name. Then click Action and select Add legacy hardware.
In the Add Hardware Wizard, click Next.
Tick the Install the hardware that I manually select from a list (Advanced) option and click Next.
Click Show All Devices and then Next.
Select Have Disk and select the .inf file you extracted before.
Select MTK_Driver_ext > SP_Drivers_v2.0 > Android > android_winusb inf.
Select MediaTek PreLoader USB VCOM Port and click Next.
Click Install this driver software anyway if you see a warning message.
Wait for the installation to complete and click Finish.
Congratulations! You have successfully installed Driver USB MTK 6253 COM Data IF on your Windows system. You can now connect your device with your PC and enjoy better data transfer or stable connection. 061ffe29dd